Tag Archives: artwork

Making Fine Art Prints: Framing

Making Fine Art Prints: Framing

We’re really coming along on this series! Almost to the finish line now! In this article, we’ll be covering the topics of matting, mounting, and framing your fine art prints. These are really the final steps in producing the artwork, and they’re equally important as the other steps.

Some artists insist on defining and providing the matting and framing as part of the final display, while others are okay with leaving it up to the recipient of the work. There’s no right answer — you’re in charge and you get to decide what to do. Personally, I’m more inclined to let the buyer mount, mat, and frame the print so that it fits well in their home or personal gallery. For the work (of other artists) that I hang in my home, I like to do these final touches myself so they all match each other.

So if your work is going to a private collector, you might just ask them what they want in terms of matting and framing. If the work is for a gallery or exhibit, they might have strict guidelines for the final presentation. Every situation will be different, so be flexible!

THINKING AHEAD

Your print and paper dimensions will be determined by the intended matting and/or framing (along with where you sign the print). You’ll want to leave a bit of extra space around the photo so that it can be properly displayed. The mat will sit over top of the paper, so account for at least 1/8″ to 1/4″ of extra space for this. If you want to leave a white border around your photo in addition to the mat, be sure to leave that much extra space. As a rule of thumb, I tend to leave 1/2″ to 1″ of extra paper around my prints — depending on the intent for final display. You can always cut off the extra paper, but you can’t add paper back to the print. So leave lots of room if in doubt.

Also be aware that standard mat windows are slightly smaller than the stated size. An 11×14 mat or frame will be a bit less than 11×14. If you print at exactly 11×14, you will cover a small amount of the image around the borders. I’ve found that it can be a real hassle trying to fit my photos into standard windows due to the fact that the images are captured at a different aspect ratio. So I save myself the headache and go for a custom cut mat. Just keep that in mind through this discussion — mats and windows can be cut to any size you need.

MOUNTING

Mounting a print involves adhering the back of the paper to a board of some type. This keeps the print nice and flat while ensuring that it doesn’t move around in the final display. Mounting boards can be things like foam core, poster board, mat board, or (my favorite) Gator board. High quality boards can be quite expensive, but keep in mind that this is a fine art photo and quality is the name of the game. Don’t skimp on the mounting board if you go this route.

When mounting (and this goes for matting as well), be certain that you’re using a non-acidic and NON-PERMANENT archival quality adhesive. Why non-permanent? Once you adhere the print to something permanently, it will likely lose value in the eyes of some collectors. The actual print is the valuable item here, so it’s best to leave the possibility of removal. But, as with any advice in this series, the decision is up to the artist.

MATTING

Matting a print involves placing material on top of the print in the form of a border. This does two things: provides a predefined viewing space for the print, and protection. The mat border can be as large or small as you wish — as long as it looks good with the photo. It also sets the photo back from the top plane of the piece, which keeps the print surface away from other surfaces (like the glass of a frame).

When it comes to mat materials, you basically have your choice of colors. You can also get mats with different colors in the core (usually white if different than the main color of the mat) — this gives the border of the print a little extra complexity and separation. Most mats come in 4 or 8 ply, with 4 being more common and available. The ply just designates how thick the mat is based on how many layers of material are used. Mat windows are commonly cut at a 45 degree bevel to show the depth of the material, but there are other types of cuts available to suit your tastes.

If you want something truly unique and perfectly matched to your particular print, go with a professional framer! These folks have a huge number of mats available to them, and they have the equipment and knowledge for cutting the stuff. Unless you do a huge volume of matting, it’s totally worth it to use a professional framer.

FRAMING

The wall was framed
Creative Commons License photo credit: Leonski

Framing is the really expensive part of the final presentation. A good frame setup will cost far more than the mounting and matting. Framing is also the main part of the piece that needs to match with the surroundings of the display location. Change the frame from wood to metal and you have a totally different artwork. People are generally picky about the framing of their displayed artwork because it needs to match what they already have on the wall.

I generally don’t frame my photos unless the recipient explicitly asks for it. Even then, I try to find out exactly what they want so they’re not disappointed with the final piece. I’ll try to let the buyer do their own mounting, matting, and framing so that shipping costs are lower and so they can present the artwork in a way that suits their own tastes.

And as I said before, use a professional for your framing needs. Don’t go buy a cheap plastic frame that happened to be on sale and stick your “fine art” print in it. The quality of the frame will completely diminish the quality of the artwork. Not trying to be snobby about this stuff, but I’m just sayin’!

USE A PROFESSIONAL!

Ok, I know, I said this a few times already. But I have to say it again. Unless you create a large volume of mounted, matted, and/or framed fine art photos, save yourself the trouble and use a professional. PROFESSIONAL is the key word here. A pro will be able to provide you with a top quality product and a top quality experience. You’ll pay a few dollars more than a craft store framing service, but it’s worth it.

I use Artistic Endeavors here in San Diego, and these guys are REALLY good at what they do. A professional will work with you rather than just for you to produce exactly what you want.

For my personal collection (of other people’s works) hanging in my living room, I choose to mount the photos on black Gator board and mat them with a 4-ply black mat and white core cut at a 45 degree bevel. I usually leave a 2-3″ mat border depending on the print size. I hang the prints on the wall without a frame — just the mat and the board cut to the same outside dimensions. It gives me a trendy display at minimal cost.

WHAT’S YOUR EXPERIENCE?

In this section, I’ve spoken mostly in generalities because we don’t have the time or bandwidth to get into the technical details of this topic. But I’d like to hear what the rest of you do for your fine art prints. Do you mount, mat, and/or frame them before sending them off? Do you do it yourself? Do you have experience with a professional framer? And if you collect prints, how do you display them in your own gallery?

FOLLOW THIS SERIES OF ARTICLES!
BACK — SIGNING
NEXT — SHIPPING

Radially

Radially

Brian Auer | 03/08/2008 | Venice Beach, CA | 75mm * f/4.0 * 1/60s * ISO100
[Print Pricing] [Contact for Signed Prints] [See it at Flickr]

This was shot using all natural light (it was in the shade on a very sunny day) and the camera was handheld with a 50mm lens. This plant caught my attention as I walked the canals of Venice, California — it was along the sidewalk behind the houses. The pattern was so very strong, and the colors so deep that I couldn’t pass it up. The water droplets on the plant were just icing on the cake.

Radially Post-Processing

  1. Unprocessed RAW
    Straight out of the camera — untouched.
  2. Processed RAW
    I did a few basic adjustments to get the white balance correct and to bring up the contrast and saturation. Nothing very extreme though.
  3. Dodge & Burn
    Here, I used non-destructive dodging and burning techniques to really make the contrast stand out where I wanted it.
  4. LAB Saturation
    Using the technique I outlined previously for boosting saturation via LAB color mode, I strengthened the greens that are so inherently present.
  5. High Pass Sharpen
    I used a very subtle sharpening by running the high pass filter and setting the blend to overlay at 50% opacity.

As you can see, lots of little changes really add up from start to finish.

February Challenge: Day 10 – Chinese Art

Chinese Art

WEEK 2 = YELLOW

And that concludes week 2 of the February Challenge for me. Still have no idea what color I’m doing for week 3, and I only have about an hour or two left before the clock strikes midnight.

To see the rest of my February Challenge photos, check the “Challenge” category here on the blog or visit my Flickr Set.