Tag Archives: outside

Darkness Creeps In

Darkness Creeps In

Brian Auer | 06/29/2008 | Huntington Beach, CA | 135mm * f/2.8 * 1/?s * ISO50
[Purchase Prints] [See it at Flickr]

This photo was taken while I was hanging out with a few friends one afternoon at Huntington Beach. It was kind of a last minute “whatcha doin this weekend” sort of thing. Bryan Villarin (F/B/T), Arnold (F/T), Jason Stone (F/B/T), John Watson (F/B/T), my son Rex (F), and I (F/B/T) were all there to grab some shots of the beach and pier while we waited for the sunset to see if anything exciting would happen (you can see them all in this Polaroid I took).

The Guys at Huntington Beach

Just as we were finishing up dinner, the sunset was approaching so we zoomed back over to the beach to grab some shots. I only had film cameras with me that day (4 of them), and I had been shooting black and white with my SLR and TLR. I still had about 10 shots on the roll in the SLR, so I finished that one off and quickly loaded a roll of Velvia 50 with the intent of cross processing. I got about half way through the roll before the sun was gone. If I had decided to swap out the roll in my TLR, I probably would have missed it altogether.

I took the Velvia with me solely for the purpose of shooting the sunset and cross processing it. I assumed that the Velvia 50 would turn out the same as the Velvia 100 when cross processed, so I was expecting to get some serious red/magenta shifts on the already red/orange sunset. Instead, I got a blue/green shift similar to what I’ve seen with Ektachrome. I’m not at all disappointed with the results… it’s just not what I had expected.

And on top of all that, I got this really neat photo that ended up with a heavy vignette/underexposure on the right side of the frame. Very cool results all around. This is one of the reasons I’m attracted to film — sometimes the results are completely unpredictable, but better than you had expected.

POST-PROCESSING

  1. Take exposed film out of camera
  2. Give film to camera store and say “Cross process, please. No prints and no cuts.”
  3. Go outside and take photos for 15 minutes
  4. Go back to the store and pick up film
  5. Take film home and scan
  6. Post photo on the Internet

Yup, seriously… no digital post processing other than maybe some dust removal. Sometimes I also adjust the white balance on my cross processed stuff to remove most of the color cast, but I left this one alone.

Simply Religious

Simply Religious

Brian Auer | 02/09/2008 | La Jolla, CA | 75mm * f/2.0 * 1/8000s * ISO100
[Print Pricing] [Contact for Signed Prints] [See it at Flickr]

This church in La Jolla, California caught my eye for its stunning white simplicity. The clear blue sky also helped to compliment the building and its elegance. I was on a photowalk, and we had just started down the road toward the beach and everybody was excited to get shooting. And so, I framed the building to include mostly sky while leaving a good portion of the church (and its surroundings) left to the imagination. I took two shots with different compositions of this church top, and this one turned out best.

Simply Religious Post-Processing

  1. Unprocessed RAW
    This one turned out a little overexposed. I shot it at f/2 with my 50mm lens and it pushed my shutter speed up to 1/8000, maxing it out. I probably should have set the f-number to at least f/2.8.
  2. Processed RAW
    Mainly I just recovered the highlights and darkened the overall image, getting it ready for Photoshop.
  3. LAB Saturation
    I saw that the blues were a little muddy, so I ran it through my LAB Saturation Photoshop Action and brought out the color while adding a bit of contrast.
  4. Clone & Sharpen
    Somehow I sort of forgot to deal with the little bit of brickwork on the bottom edge, so I took that out with the patch tool. Then I sharpened it up a bit.
  5. Curves Adjustment
    I wasn’t totally happy with the tones and colors, so I added a curves adjustment to bring up the highlights and push the shadows down. I left the blending mode to “Normal” so the blues would get a little punch too.

Enjoy!

Field of Yellow

Field of Yellow

Brian Auer | 04/13/2008 | La Jolla, CA | 15mm * f/8.0 * 1/160s * ISO100
[Print Pricing] [Contact for Signed Prints] [See it at Flickr]

This one was taken along the shores of La Jolla, California. I was out with my wife this weekend and we decided to take a short trip down the Pacific Coast Highway from Carlsbad to La Jolla. The shores of La Jolla are some of the most scenic in the area — lots of small cliffs and sandstone formations, caves, vegetation, tide pools, etc. I shot this scene with my Sigma 10-20mm lens at the widest focal length of 10mm. I’ve been ignoring that lens for a while, so I put it on the camera and left it there all day… well, I had my film camera with me too so I wasn’t completely limited on focal length.

Field of Yellow Post-Processing

  1. Unprocessed RAW
    Here’s what the unprocessed RAW image looked like — pretty dull and a little washed out.
  2. Processed RAW
    I cooled the white balance slightly, increased the contrast, increased the vibrance and saturation, and added a few other minor tweaks to the exposure settings.
  3. LAB Saturation
    I used my LAB Saturation Photoshop Action to bring the colors out a little better. This helped to remove some of the muddy haze in the sky.
  4. Dodge
    Selective dodging around the green of the waves and on the left side of the flowers at the bottom of the frame.
  5. Burn
    Selective burning in the sky and on the right side of the flowers to add more balance.

Enjoy!

Radially

Radially

Brian Auer | 03/08/2008 | Venice Beach, CA | 75mm * f/4.0 * 1/60s * ISO100
[Print Pricing] [Contact for Signed Prints] [See it at Flickr]

This was shot using all natural light (it was in the shade on a very sunny day) and the camera was handheld with a 50mm lens. This plant caught my attention as I walked the canals of Venice, California — it was along the sidewalk behind the houses. The pattern was so very strong, and the colors so deep that I couldn’t pass it up. The water droplets on the plant were just icing on the cake.

Radially Post-Processing

  1. Unprocessed RAW
    Straight out of the camera — untouched.
  2. Processed RAW
    I did a few basic adjustments to get the white balance correct and to bring up the contrast and saturation. Nothing very extreme though.
  3. Dodge & Burn
    Here, I used non-destructive dodging and burning techniques to really make the contrast stand out where I wanted it.
  4. LAB Saturation
    Using the technique I outlined previously for boosting saturation via LAB color mode, I strengthened the greens that are so inherently present.
  5. High Pass Sharpen
    I used a very subtle sharpening by running the high pass filter and setting the blend to overlay at 50% opacity.

As you can see, lots of little changes really add up from start to finish.

Abused and Ignored

Abused and Ignored

Brian Auer | 03/08/2008 | Venice Beach, CA | 75mm * f/2.5 * 1/8000s * ISO200
[Print Pricing] [Contact for Signed Prints] [See it at Flickr]

I found this beautiful lady in Venice Beach. She didn’t say much, but I think she was into me. Don’t let her distant stare fool you, she had quite the personality. Underneath of her “I’m sexy and I know it” facade, she’s screaming for attention. Because she is, after all… abused and ignored.

Abused and Ignored Post-Processing

  1. Unprocessed RAW
    There you have it, straight out of the camera.
  2. Processed RAW
    Minimal processing for white balance and exposure (using the “Auto” setting in ACR).
  3. Color Curves
    I used the technique from my “Redscale Process” described some weeks ago. After adjusting the curves, the blend mode was set to “color”.
  4. Color Fill
    Again, from the mentioned Photoshop technique. Opacity set to 20% and blend mode to “color”.
  5. Luminosity Curves
    Added some contrast to make it a little more punchy. Blend mode was set to “luminosity” to preserve previous color adjustments.

Now if I could figure out how to create the same effect in ACR I’d be pretty clever.

Feet on the Beach

Feet on the Beach

Brian Auer | 01/19/2008 | San Diego, CA | 300mm * f/6.7 * 1/250s * ISO100
[Print Pricing] [Contact for Signed Prints] [See it at Flickr]

This one was taken on the Torrey Pines State Beach near my home in San Diego. The feet actually belong to my Mother-in-Law. I spotted her walking along the water near sunset and I couldn’t resist trying to get some “walking on the beach” photos. I shot about 7 or 8 in rapid-fire mode and this one turned out the best from all of them. The reflection turned out better than I had hoped, and the moment in mid-stride made for an interesting photo.

Feet on the Beach Post-Processing

All of the following post-processing steps were done with Adobe Camera Raw — no Photoshop was used on this photo.

  1. Untouched RAW Image
    This is what the image looked like straight out of the camera. Not a lot of color to begin with, so black & white was a natural choice for me.
  2. Black & White Conversion
    Before doing anything, I switched to grayscale. I pushed the red, orange, yellow, green, and aqua to negative compensation while the blues, purples and magentas were pushed in the positive direction.
  3. Basic Adjustments
    I left the white balance set at a temperature of 5100 and a tint of -1. I left the exposure near zero, while I boosted the recovery to 33, fill light to 41, bumped the blacks up to 34, increased the brightness to 76, pushed up the contrast to 19, and I ramped the clarity all the way up to 100.
  4. Tone Curve Adjustment
    Using the parametric tone curve, I set the highlights to +22, lights to +49, darks to -33, and shadows to -47. This gave me the strong contrast I was after, and I actually pushed a few (very few) of the shadows off the histogram. Overall, the image is heavy on the darker tones.
  5. Vignette and Sharpen
    In the lens correction menu, I set the vignette to an amount of -70 with a midpoint of 20 — and this gave me the strong frame around the subject. As a last step, I set the sharpening under the detail menu to an amount of 50 with a radius of 1.5 pixels.

Enjoy!

Wide Open

Wide Open

Brian Auer | 02/23/2008 | San Diego, CA | 15mm * f/6.3 * 1/1000s * ISO100
[Print Pricing] [Contact for Signed Prints] [See it at Flickr]

When the wind is just right, the skies above Black’s Beach team with para gliders and hang gliders. This particular shot was taken at a 10mm focal length (15mm full-frame equivalent) as I stood very near the edge of a 300 foot sand cliff above the Pacific Ocean. The gliders ride the updrafts as the wind comes off the ocean and shoots straight up along the face of the cliff. These thrill seekers can ride these winds for extended periods of time and never lose altitude. The Gliderport is located on the Torrey Pines State Reserve, nestled between the beach towns of La Jolla and Del Mar. La Jolla can be seen in the background of this photo as it extends out into the ocean to form a point. And those little dots on the sand below… those are people.

Wide Open Post-Processing

All of the following post-processing steps were done with Adobe Camera Raw — no Photoshop was used on this photo.

  1. Untouched RAW Image
    This is what the image looked like straight out of the camera. Not too shabby, but it needed some work on a few areas. I decided to keep the color on this one because of the sky in the upper portion of the image.
  2. Basic Adjustments
    I set the white balance to a temperature of 5500 and a tint of +8. Then I brought the exposure to -.5, set the recovery to 100, no fill light, blacks at 13, brightness at +14, contrast at +35, clarity at 35, vibrance at +17, and saturation at +7. Do note that a lot of these settings weren’t made in this order — there’s a lot of back-and-forth between these settings and the settings on the other two panels I used.
  3. Tone Curve Adjustment
    I set a “strong contrast” on the point curve, and added some extra contrast on the parametric curve with highlights set to -28, lights at +26, darks at -13, and shadows at -4.
  4. Vignette and Sharpen
    In the detail panel, I set the sharpening to an amount of 50 and a radius of 1.5. In the lens corrections panel, I added some positive vignette. So instead of darkening the corners, I lightened them to even out the image and brighten the foreground. At 10mm, my lens tends to produce a slight amount of vignette, so I punched up the value in ACR to +50 with a midpoint of 0. I lost some contrast in the clouds (which I over-contrasted just for this reason), but I gained a whole lot of brightness in the lower left corner.

Enjoy!

The Place To Be

The Place To Be

Brian Auer | 02/09/2008 | La Jolla, CA | 19mm * f/4.5 * 1/400s * ISO100
[Print Pricing] [Contact for Signed Prints] [See it at Flickr]

This shot was taken during the La Jolla photowalk in early February. At the time, I found the scene to be very interesting — the hut, the birds, the people, and the ocean in the background really seemed to work together in this candid shot. I kept things fairly well centered because of the strong symmetry already present in the hut. The Birds and the people served to break up that symmetry in isolated areas, so I didn’t feel I needed to break it up even more. Lucky for me, I also left some extra room at the top of the frame, which served as a nice backdrop for some heavy vignette.

The Place To Be Post-Processing

All of the following post-processing steps were done with Adobe Camera Raw — no Photoshop was used on this photo.

  1. Untouched RAW Image
    This is what the image looked like straight out of the camera. It could probably work as a color image too, but I wanted to go colorless.
  2. Black & White Conversion
    Before doing anything, I switched to grayscale. I pushed the red, orange, yellow, green, and aqua to negative compensation while the blues, purples and magentas were pushed in the positive direction.
  3. Basic Adjustments
    I left the white balance set at a temperature of 5800 and a tint of +3. I left the exposure, recovery, and clarity set to zero, while I boosted the fill light to 46, bumped the blacks up to 36, dropped the brightness to 16, and pushed up the contrast to 52.
  4. Tone Curve Adjustment
    Using the parametric tone curve, I set the highlights to +41, lights to +39, darks to -44, and shadows to -76. This gave me the strong contrast I was after, and I actually pushed a bunch of the highlights and shadows off the histogram.
  5. Vignette and Sharpen
    In the lens correction menu, I set the vignette to an amount of -76 with a midpoint of 19 — and this gave me the strong frame around the hut while filling in some of that sky. As a last step, I set the sharpening under the detail menu to an amount of 50 with a radius of 1.5 pixels.

Enjoy!

February Challenge: Day 12 – 22 Lanes

22 Lanes

WEEK 3 = RED

Long exposure of traffic on Interstate 5 where it splits into the 5 and 805. Can you believe that there are 22 lanes at this point and it’s backed up during rush hour every day?

I’ve never done one of these long-exposure traffic shots before. It turns out that the white lights are much brighter than the red ones. Plus there wasn’t much traffic, so it probably could’ve turned out better. Here are a few others from that night as I was messing around with different amounts of focus and shutter speed:

14 Point Star 8 Point Star Octogons Short Exposure Moderate Exposure Long Exposure

To see the rest of my February Challenge photos, check the “Challenge” category here on the blog or visit my Flickr Set.

February Challenge: Day 9 – Pedestrian Crossing

Pedestrian Crossing

WEEK 2 = YELLOW

This photo (and those shown below) came from our recent La Jolla photowalk. I totally overworked the colors on this image and it was completely on purpose, but I like the way it ended up. I’ll be uploading quite a few photos to Flickr over the course of this week, so keep your eyes on my stuff over there if you’re interested in seeing how the day turned out. You can also follow the photos from everybody else, as long as they’re tagged with “photowalking020908“. Honestly, with all this color stuff for the February Challenge, you can expect to see a lot of my photowalk images turning out black & white.

To see the rest of my February Challenge photos, check the “Challenge” category here on the blog or visit my Flickr Set.