Tag Archives: sand

Field of Yellow

Field of Yellow

Brian Auer | 04/13/2008 | La Jolla, CA | 15mm * f/8.0 * 1/160s * ISO100
[Print Pricing] [Contact for Signed Prints] [See it at Flickr]

This one was taken along the shores of La Jolla, California. I was out with my wife this weekend and we decided to take a short trip down the Pacific Coast Highway from Carlsbad to La Jolla. The shores of La Jolla are some of the most scenic in the area — lots of small cliffs and sandstone formations, caves, vegetation, tide pools, etc. I shot this scene with my Sigma 10-20mm lens at the widest focal length of 10mm. I’ve been ignoring that lens for a while, so I put it on the camera and left it there all day… well, I had my film camera with me too so I wasn’t completely limited on focal length.

Field of Yellow Post-Processing

  1. Unprocessed RAW
    Here’s what the unprocessed RAW image looked like — pretty dull and a little washed out.
  2. Processed RAW
    I cooled the white balance slightly, increased the contrast, increased the vibrance and saturation, and added a few other minor tweaks to the exposure settings.
  3. LAB Saturation
    I used my LAB Saturation Photoshop Action to bring the colors out a little better. This helped to remove some of the muddy haze in the sky.
  4. Dodge
    Selective dodging around the green of the waves and on the left side of the flowers at the bottom of the frame.
  5. Burn
    Selective burning in the sky and on the right side of the flowers to add more balance.

Enjoy!

Feet on the Beach

Feet on the Beach

Brian Auer | 01/19/2008 | San Diego, CA | 300mm * f/6.7 * 1/250s * ISO100
[Print Pricing] [Contact for Signed Prints] [See it at Flickr]

This one was taken on the Torrey Pines State Beach near my home in San Diego. The feet actually belong to my Mother-in-Law. I spotted her walking along the water near sunset and I couldn’t resist trying to get some “walking on the beach” photos. I shot about 7 or 8 in rapid-fire mode and this one turned out the best from all of them. The reflection turned out better than I had hoped, and the moment in mid-stride made for an interesting photo.

Feet on the Beach Post-Processing

All of the following post-processing steps were done with Adobe Camera Raw — no Photoshop was used on this photo.

  1. Untouched RAW Image
    This is what the image looked like straight out of the camera. Not a lot of color to begin with, so black & white was a natural choice for me.
  2. Black & White Conversion
    Before doing anything, I switched to grayscale. I pushed the red, orange, yellow, green, and aqua to negative compensation while the blues, purples and magentas were pushed in the positive direction.
  3. Basic Adjustments
    I left the white balance set at a temperature of 5100 and a tint of -1. I left the exposure near zero, while I boosted the recovery to 33, fill light to 41, bumped the blacks up to 34, increased the brightness to 76, pushed up the contrast to 19, and I ramped the clarity all the way up to 100.
  4. Tone Curve Adjustment
    Using the parametric tone curve, I set the highlights to +22, lights to +49, darks to -33, and shadows to -47. This gave me the strong contrast I was after, and I actually pushed a few (very few) of the shadows off the histogram. Overall, the image is heavy on the darker tones.
  5. Vignette and Sharpen
    In the lens correction menu, I set the vignette to an amount of -70 with a midpoint of 20 — and this gave me the strong frame around the subject. As a last step, I set the sharpening under the detail menu to an amount of 50 with a radius of 1.5 pixels.

Enjoy!

The Place To Be

The Place To Be

Brian Auer | 02/09/2008 | La Jolla, CA | 19mm * f/4.5 * 1/400s * ISO100
[Print Pricing] [Contact for Signed Prints] [See it at Flickr]

This shot was taken during the La Jolla photowalk in early February. At the time, I found the scene to be very interesting — the hut, the birds, the people, and the ocean in the background really seemed to work together in this candid shot. I kept things fairly well centered because of the strong symmetry already present in the hut. The Birds and the people served to break up that symmetry in isolated areas, so I didn’t feel I needed to break it up even more. Lucky for me, I also left some extra room at the top of the frame, which served as a nice backdrop for some heavy vignette.

The Place To Be Post-Processing

All of the following post-processing steps were done with Adobe Camera Raw — no Photoshop was used on this photo.

  1. Untouched RAW Image
    This is what the image looked like straight out of the camera. It could probably work as a color image too, but I wanted to go colorless.
  2. Black & White Conversion
    Before doing anything, I switched to grayscale. I pushed the red, orange, yellow, green, and aqua to negative compensation while the blues, purples and magentas were pushed in the positive direction.
  3. Basic Adjustments
    I left the white balance set at a temperature of 5800 and a tint of +3. I left the exposure, recovery, and clarity set to zero, while I boosted the fill light to 46, bumped the blacks up to 36, dropped the brightness to 16, and pushed up the contrast to 52.
  4. Tone Curve Adjustment
    Using the parametric tone curve, I set the highlights to +41, lights to +39, darks to -44, and shadows to -76. This gave me the strong contrast I was after, and I actually pushed a bunch of the highlights and shadows off the histogram.
  5. Vignette and Sharpen
    In the lens correction menu, I set the vignette to an amount of -76 with a midpoint of 19 — and this gave me the strong frame around the hut while filling in some of that sky. As a last step, I set the sharpening under the detail menu to an amount of 50 with a radius of 1.5 pixels.

Enjoy!

Forgotten Fortress

Forgotten Fortress

Brian Auer | 08/04/2007 | Santa Monica, CA | 157mm * f/2.8 * 1/30s * ISO400
[Buy Prints] [Buy Rights] [See it at Flickr]

This one was taken on the beach at Santa Monica in the summer of 2007 during a group Photowalk. The light of day was fading, and the beach was fairly empty. I saw this little sand fortress (complete with swimming pool) and the bucket that was used to make it. The scene kind of struck me as interesting because of the bucket laying there abandoned and the handle detached off in the background. It had a solemn mood about it, so I snapped a few shots as I made my way down the beach.

Forgotten Fortress Post-Processing

  1. In-Camera JPEG
    As you can see, the bright green bucket is probably what first caught my eye.
  2. Processed RAW
    This is unusual for me, but I did a ton of processing in Adobe Camera Raw. I converted to black and white, adjusted my exposure options, adjusted my curves, added a warming tone, and finally added vignette. I’m not sure if I like this method of processing because it leaves me back at ground zero if I want to make some tweaks. Maybe I should start saving the XMP settings for each file… Or is there an easier way to do this?
  3. Curves Adjustment
    Once in Photoshop, I just applied a curves adjustment layer with an “S” curve to bump the contrast and give it a bit more saturation.
  4. Sharpening
    I sharpened the lightness channel in LAB mode using the unsharp mask at 75%, 1.5 pixels, and a threshold of 0.

Enjoy!