Tag Archives: usa

Simply Religious

Simply Religious

Brian Auer | 02/09/2008 | La Jolla, CA | 75mm * f/2.0 * 1/8000s * ISO100
[Print Pricing] [Contact for Signed Prints] [See it at Flickr]

This church in La Jolla, California caught my eye for its stunning white simplicity. The clear blue sky also helped to compliment the building and its elegance. I was on a photowalk, and we had just started down the road toward the beach and everybody was excited to get shooting. And so, I framed the building to include mostly sky while leaving a good portion of the church (and its surroundings) left to the imagination. I took two shots with different compositions of this church top, and this one turned out best.

Simply Religious Post-Processing

  1. Unprocessed RAW
    This one turned out a little overexposed. I shot it at f/2 with my 50mm lens and it pushed my shutter speed up to 1/8000, maxing it out. I probably should have set the f-number to at least f/2.8.
  2. Processed RAW
    Mainly I just recovered the highlights and darkened the overall image, getting it ready for Photoshop.
  3. LAB Saturation
    I saw that the blues were a little muddy, so I ran it through my LAB Saturation Photoshop Action and brought out the color while adding a bit of contrast.
  4. Clone & Sharpen
    Somehow I sort of forgot to deal with the little bit of brickwork on the bottom edge, so I took that out with the patch tool. Then I sharpened it up a bit.
  5. Curves Adjustment
    I wasn’t totally happy with the tones and colors, so I added a curves adjustment to bring up the highlights and push the shadows down. I left the blending mode to “Normal” so the blues would get a little punch too.

Enjoy!

Radially

Radially

Brian Auer | 03/08/2008 | Venice Beach, CA | 75mm * f/4.0 * 1/60s * ISO100
[Print Pricing] [Contact for Signed Prints] [See it at Flickr]

This was shot using all natural light (it was in the shade on a very sunny day) and the camera was handheld with a 50mm lens. This plant caught my attention as I walked the canals of Venice, California — it was along the sidewalk behind the houses. The pattern was so very strong, and the colors so deep that I couldn’t pass it up. The water droplets on the plant were just icing on the cake.

Radially Post-Processing

  1. Unprocessed RAW
    Straight out of the camera — untouched.
  2. Processed RAW
    I did a few basic adjustments to get the white balance correct and to bring up the contrast and saturation. Nothing very extreme though.
  3. Dodge & Burn
    Here, I used non-destructive dodging and burning techniques to really make the contrast stand out where I wanted it.
  4. LAB Saturation
    Using the technique I outlined previously for boosting saturation via LAB color mode, I strengthened the greens that are so inherently present.
  5. High Pass Sharpen
    I used a very subtle sharpening by running the high pass filter and setting the blend to overlay at 50% opacity.

As you can see, lots of little changes really add up from start to finish.

Feet on the Beach

Feet on the Beach

Brian Auer | 01/19/2008 | San Diego, CA | 300mm * f/6.7 * 1/250s * ISO100
[Print Pricing] [Contact for Signed Prints] [See it at Flickr]

This one was taken on the Torrey Pines State Beach near my home in San Diego. The feet actually belong to my Mother-in-Law. I spotted her walking along the water near sunset and I couldn’t resist trying to get some “walking on the beach” photos. I shot about 7 or 8 in rapid-fire mode and this one turned out the best from all of them. The reflection turned out better than I had hoped, and the moment in mid-stride made for an interesting photo.

Feet on the Beach Post-Processing

All of the following post-processing steps were done with Adobe Camera Raw — no Photoshop was used on this photo.

  1. Untouched RAW Image
    This is what the image looked like straight out of the camera. Not a lot of color to begin with, so black & white was a natural choice for me.
  2. Black & White Conversion
    Before doing anything, I switched to grayscale. I pushed the red, orange, yellow, green, and aqua to negative compensation while the blues, purples and magentas were pushed in the positive direction.
  3. Basic Adjustments
    I left the white balance set at a temperature of 5100 and a tint of -1. I left the exposure near zero, while I boosted the recovery to 33, fill light to 41, bumped the blacks up to 34, increased the brightness to 76, pushed up the contrast to 19, and I ramped the clarity all the way up to 100.
  4. Tone Curve Adjustment
    Using the parametric tone curve, I set the highlights to +22, lights to +49, darks to -33, and shadows to -47. This gave me the strong contrast I was after, and I actually pushed a few (very few) of the shadows off the histogram. Overall, the image is heavy on the darker tones.
  5. Vignette and Sharpen
    In the lens correction menu, I set the vignette to an amount of -70 with a midpoint of 20 — and this gave me the strong frame around the subject. As a last step, I set the sharpening under the detail menu to an amount of 50 with a radius of 1.5 pixels.

Enjoy!