Tag Archives: Venice Beach

Radially

Radially

Brian Auer | 03/08/2008 | Venice Beach, CA | 75mm * f/4.0 * 1/60s * ISO100
[Print Pricing] [Contact for Signed Prints] [See it at Flickr]

This was shot using all natural light (it was in the shade on a very sunny day) and the camera was handheld with a 50mm lens. This plant caught my attention as I walked the canals of Venice, California — it was along the sidewalk behind the houses. The pattern was so very strong, and the colors so deep that I couldn’t pass it up. The water droplets on the plant were just icing on the cake.

Radially Post-Processing

  1. Unprocessed RAW
    Straight out of the camera — untouched.
  2. Processed RAW
    I did a few basic adjustments to get the white balance correct and to bring up the contrast and saturation. Nothing very extreme though.
  3. Dodge & Burn
    Here, I used non-destructive dodging and burning techniques to really make the contrast stand out where I wanted it.
  4. LAB Saturation
    Using the technique I outlined previously for boosting saturation via LAB color mode, I strengthened the greens that are so inherently present.
  5. High Pass Sharpen
    I used a very subtle sharpening by running the high pass filter and setting the blend to overlay at 50% opacity.

As you can see, lots of little changes really add up from start to finish.

Abused and Ignored

Abused and Ignored

Brian Auer | 03/08/2008 | Venice Beach, CA | 75mm * f/2.5 * 1/8000s * ISO200
[Print Pricing] [Contact for Signed Prints] [See it at Flickr]

I found this beautiful lady in Venice Beach. She didn’t say much, but I think she was into me. Don’t let her distant stare fool you, she had quite the personality. Underneath of her “I’m sexy and I know it” facade, she’s screaming for attention. Because she is, after all… abused and ignored.

Abused and Ignored Post-Processing

  1. Unprocessed RAW
    There you have it, straight out of the camera.
  2. Processed RAW
    Minimal processing for white balance and exposure (using the “Auto” setting in ACR).
  3. Color Curves
    I used the technique from my “Redscale Process” described some weeks ago. After adjusting the curves, the blend mode was set to “color”.
  4. Color Fill
    Again, from the mentioned Photoshop technique. Opacity set to 20% and blend mode to “color”.
  5. Luminosity Curves
    Added some contrast to make it a little more punchy. Blend mode was set to “luminosity” to preserve previous color adjustments.

Now if I could figure out how to create the same effect in ACR I’d be pretty clever.